TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 706 of 968

TM 9-2815-210-34-2-2

FRAME 2

Soldiers

A and B

Soldier A

Soldier B

WARNING

Flywheel (1) is very heavy. It should be lifted into

place by two persons. After flywheel is in position,

it must be held firmly until mounting bolts are put

in. Failure to do so may cause injury to personnel and

damage to equipment.

1.

Lift flywheel (1) onto crankshaft flange (2). Aline scribe marks

and slide flywheel onto pilot bolt (3).

2.

Hold flywheel (1) in place while soldier B puts in five mounting

lockbolts (4).

3.

Coat six lockbolts (4) with oil. Put in and hand tighten five

lockbolts.

4.

Take out pilot bolt (3). put in other lockbolt (4).

GO TO FRAME 3

5-77