TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 78 of 968
TM 9-2815-210-34-2-2
FRAME 38
1.
2.
3.
NOTE
Four different crankshafts (1) can be used in these engines.
They differ in the diameters of the main bearing journals
and connecting rod journals. The four crankshafts are:
early model standard size, late model standard size, 0.0100-
inch undersize and 0.0200-inch undersize.
If you have any early or late model standard size crankshaft (1), get a new
standard size main bearing kit.
If you have a 0.0100-undersize crankshaft (1), get a new 0.0100 undersize
main bearing kit.
If you have a 0.0200-undersize crankshaft (1), get a new 0.0200-undersize
m&i bearing kit.
IF WORKING ON STANDARD SIZE CRANKSHAFT, GO TO FRAME 39.
IF WORKING ON 0.0100-INCH UNDERSIZE CRANKSHAFT, GO TO FRAME 40.
IF WORKING ON 0.0200-INCH UNDERSIZE CRANKSHAFT, GO TO FRAME 41
4-59
Back to Top
