TM 9-2815-224-34&P
15-32.2
Change 4
Engine Governor Maintenance Instructions (Cont)
15-8.
THROTTLE AIR CYLINDER REMOVAL/INSTALLATION (CONT).
(3)
Adjust link adapter (8) so that distance from
center of screw (9) to center of link adapter
pivot point (3) is 7 in. (177.8 mm).
(4)
Tighten two speed control lever screws (10).
(5)
Connect air lines (11 and 12) to throttle
aircylinder(4).
(6)
Connect spring (13) from air cylinder
bracket (14) to speed control lever (15).
e.
Follow-on Maintenance.
(1)
Connect batteries (TM 9-2320-279-20).
(2)
Start engine and check engine operation of throttle air cylinder (TM 9-2320-279-10).
END OF TASK