TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 366 of 736

TM 9-2815-225-34&P

0042 00

0042 00-12

CYLINDER BLOCK COMPONENTS INSTALLATION (Contd)

OIL PUMP

NOTE

Perform steps 1 through 6 for Big Cam III only.

1.

Apply pipe sealant to threads of elbow (2).

2.

Install elbow (2) on cylinder block (1).

3.

Apply pipe sealant to threads of oil transfer tube (3).

4.

Install oil transfer tube (3) on elbow (2).

5.

Install loose end of oil transfer tube (3) on oil pump (6).

6.

Install oil pump (6) and new gasket (7) on cylinder block (1) with five bolts (4) and new

lockwashers (5). Tighten bolts (4) 45 lb-ft (61 N

•

m).

Figure 7. Oil Transfer Tube and Elbow Installation.

1

7

6

5

4

3

2