TM-9-2920-257-30-P
GENERATOR, ALTERNATING CURRENT, 200 AMPERES
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS
MAY 1987
TM-9-2920-257-30-P - Page 15 of 111
TM 9-2920-257-30&P
Table 2-1.
Generator Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 8.
Connector Pin and Lead Continuity Check.
Check continuity of pins and leads in connector
assembly according to figure 2-6.
If the ohmmeter readings are greater than 0,
connector assembly is defective. Replace
connector assembly in accordance with paragraph
3-3 and go to step 9.
2-8
Figure 2-6 .
Back to Top
