TM-9-6920-430-14

COOLANT RECHARGING UNIT, TRAINING GUIDED MISSILE SYSTEM M80 AND CHARGER, BATTERY PP-7309/T

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

AUGUST 1980

TM-9-6920-430-14 - Page 108 of 180

TM 9-6920-430-14

(14) Open the lid on the Pressure Transducer Assembly and set the Pressure

Transducer Assembly ON/OFF switch (20) to OFF. Disconnect the Pressure Transducer

Assembly power cable (21) from the AC power outlet. Coil the power cable and place in

the Pressure Transducer Assembly cable storage area (24).

(15) Disconnect the digital readout cable connector (22) at the Pressure

Transducer Assembly. Inspect the digital readout cable for damage and wipeclean with a

rag if necessary. Coil the cable attached to the digital readout device (23) and place the

device with the cable into the Pressure Transducer Assembly cable storage area (24).

(16) Close and secure the Pressure Transducer Assembly lid and place the

assembly (25) in one end of the storage box.

(17) Coil the control box cable assembly (26) and place in the storage box with

the Pressure Transducer Assembly.

3-48

Change 3