TB-9-2350-277-40-P-1
CARRIER, MORTAR, 120-MM M121, SELF-PROPELLED M1064A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 1 OF 4
JUNE 2009
TB-9-2350-277-40-P-1 - Page 32 of 100
TB 9-2350-277-40&P-1
MODIFICATION PROCEDURES – Continued
0004 00
0004 00-2
1.
Locate and mark for center hole (3), measuring from left hull edge (2) 12-7/8 inches and 5-1/2
inches from the rear edge of hull (1).
Figure 1.
Locate and Mark CREW II Cable Port
(External Fuel Tank Not Shown)
Back to Top
