TB-9-2350-277-40-P-2
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 2 OF 4
JUNE 2009
TB-9-2350-277-40-P-2 - Page 42 of 100
TB 9-2350-277-40&P-2
INSTALLATION PROCEDURES – Continued
0006 00
0006 00-4
4.
Install GPS sensor, mounting bracket, and cable on vehicle.
a.
Route GPS cable (13) through antenna opening, new gasket (15), and GPS mounting
bracket (14).
b.
Connect GPS cable (13) to GPS sensor (12).
c.
Install GPS sensor (12) on GPS mounting bracket (14) and secure with two screws (17).
d.
Secure GPS cable (13) to GPS mounting bracket (14) with three tie straps (16).
e.
Position gasket (15) and GPS mounting bracket (14) over antenna opening.
Figure 3.
GPS Sensor, Mounting Bracket, and Cable Installation
Back to Top
