TB-9-2350-277-40-P-2
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 2 OF 4
JUNE 2009
TB-9-2350-277-40-P-2 - Page 36 of 100
TB 9-2350-277-40&P-2
MODIFICATION PROCEDURES – Continued
0005 00
0005 00-6
DRILL CREW II ENGINE BULKHEAD CABLE CLAMP
1.
Locate and mark for hole (11) on engine bulkhead, measuring from inside of hull roof edge (9)
and from inside of right side hull edge (10).
2.
Drill a hole using a 1/4 inch drill thru engine bulkhead hull.
Figure 5.
Location for CREW II Engine Bulkhead Cable Clamp
Back to Top
