TB-9-2350-277-40-P-2
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 2 OF 4
JUNE 2009
TB-9-2350-277-40-P-2 - Page 40 of 100
TB 9-2350-277-40&P-2
INSTALLATION PROCEDURES – Continued
0006 00
0006 00-2
1.
Remove SINCGARS antenna from vehicle.
a.
Remove bolt (6), two lockwashers (5), and ground strap (8) from inside vehicle.
Retain
hardware for re-installation.
b.
Disconnect cable (7) from antenna base (3).
c.
Remove four screws (2), lockwashers (1), antenna (3), and gasket (4) from vehicle.
Discard
screws and gasket.
Retain antenna and lockwashers for re-installation.
2.
Scrape any remaining gasket material from mating surface.
Clean with cleaning compound.
Figure 1.
SINCGARS Antenna Removal
Back to Top
