TB-9-2350-277-40-P-2
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 2 OF 4
JUNE 2009
TB-9-2350-277-40-P-2 - Page 46 of 100
TB 9-2350-277-40&P-2
INSTALLATION PROCEDURES – Continued
0006 00
0006 00-8
INSTALL GPS ANTENNA RISER
1.
Clean antenna riser mounting surface on hull with cleaning compound.
2.
Install new gasket (15) and antenna riser (24) over GPS antenna opening.
Secure with four
screws (26) and lockwashers (25).
TORQUE SCREWS TO 44 LB-FT (59.6 N
·
m).
3.
Install new gasket (15) and access cover (22) on antenna riser (24).
Secure with four screws
(18), six flat washers (20), two lockwashers (21), and four self-locking nuts (23).
Figure 7.
GPS Antenna Riser Installation
Back to Top
