TB-9-2350-277-40-P-2
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 2 OF 4
JUNE 2009
TB-9-2350-277-40-P-2 - Page 49 of 100
TB 9-2350-277-40&P-2
INSTALLATION PROCEDURES – Continued
0006 00
0006 00-11
INSTALL RCU/PDA CABLE CLAMPS AND COMMANDER’S INTERCOM UNIT
NOTE
If the carrier has a commander’s intercom unit on the left side of the
engine bulkhead, go to Step 3.
If carrier has a commander’s intercom
unit on the right side of the engine bulkhead, do Steps 1-2.
1.
Install commander’s intercom mounting bracket (39) to RCU/PDA bracket assembly (32).
Secure
with two screws (34), lockwashers (38), and self-locking nuts (37).
2.
Install commander’s intercom unit (35) to mounting bracket (39).
Secure with two screws (33)
and lockwashers (36).
Connect communication harness to commander’s intercom unit (35).
Figure 10.
Commander’s Intercom Unit Installation
Back to Top
