TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007
TB-9-2510-251-13

  TB-9-2510-251-13 - Page 40 of 624

2-24
TB 9-2510-251-13
2-1.1
Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1
with GSIE Add-on-Armor (Cont’d).
d. Install Refrigerant Hoses (Cont’d)
Figure 2-34.
Refrigerant Hose Routing (#6)
#6 HOSE
(9)
Evaporator to drier, #6 hose:
Cut a six foot section from #6 hose.
Route six foot section of #6 hose through front
grommet in armor floor plate, across top of transmission to driver side frame rail.
Continue
forward on top of frame rail.
Secure to outlet (female) fitting on drier.
(10)
Drier to condenser, #6 hose:
Route remaining length of #6 hose from inlet (male) fitting on drier up back wall of cab.
Secure to #8 hose to condenser.


Back to Top