TB-9-2510-251-13

TECHNICAL BULLETIN

OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING

AUGUST 2007
TB-9-2510-251-13

  TB-9-2510-251-13 - Page 31 of 624

2-15
TB 9-2510-251-13
28
27
25
26
24
Figure 2-19.
Lower Support Bracket Installation
2-1.1
Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1
with GSIE Add-on-Armor (Cont’d).
b. Install Evaporator and Condenser (Cont’d)
(21)
Insert four new bolts (24), flat washers (25), and oversize washers (26) through lower
evaporator support bracket, armor plates, rear curtain and condenser mount angle.
Install
flat washers (27) and locknuts (28) and tighten snug.
NOTE
For correct installation of compressor mount angles, bar in bottom of rear
curtain should be below compressor mount angles and not between angles
and armor plate.
COMPRESSOR
MOUNT ANGLE
CURTAIN BAR
Figure 2-20.
Condensor Mount Angle


Back to Top