TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 28 of 624
2-12
TB 9-2510-251-13
(10)
Pull rear curtain down tight over rear of armor plate.
(11)
Mark and cut four crosses (8) over the bolts and nuts attaching the center armor plate to
the rear side plates.
(12)
Cut crosses just large enough for nut to push through.
7
6
5
8
2-1.1
Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1
with GSIE Add-on-Armor (Cont’d).
b. Install Evaporator and Condenser (Cont’d)
Figure 2-13.
Rear and Side Curtains
Figure 2-14.
Center Armor Hardware Cutouts
(9)
Four-door vehicles only:
a. Remove rear curtain (5) from three lower quarter turn fasteners (6) on rear b-pillar.
b. Remove side curtain (7) from two lower quarter turn fasteners (6) on rear b-pillar.
c.
Repeat for remaining side.
Back to Top
