TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 30 of 624
2-14
TB 9-2510-251-13
2-1.1
Installation of Air Conditioning Kit to M998 and M998A1; M1037; M1097 and M1097A1
with GSIE Add-on-Armor (Cont’d).
b. Install Evaporator and Condenser (Cont’d)
Figure 2-17.
Upper Clamp Brackets (Two-Door)
Figure 2-18.
Install Evaporator Unit
21
19
20
23
23
23
23
22
(16) Two-door vehicles only:
a. Remove and discard two upper support brackets from evaporator unit.
Set aside bolts
for future use.
b. Loosely attach upper clamp brackets (19) to evaporator unit (20) with four bolts (21).
(17)
Remove two lower center 1/2 inch bolts from rear center armor plate and rear side armor
plates.
(18)
Hang evaporator unit (20) from inside top of armor plate (above holes drilled in
transmission tunnel).
(19)
Adjust evaporator unit (20) to align slots in lower support bracket (22) with slots in center
armor plate.
(20) Tighten evaporator unit top clamp bracket bolts (23).
20
Back to Top
