TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 507 of 704
0051-21
Change 1
TB 9-3950-253-13&P
0051
PLS REMOVAL – CONTINUED
Hydraulic Fittings Replacement – Continued
00051
NOTE
•
Hand tighten all hoses and fittings on installation
•
Install longer end of T-fitting through bracket.
5. Install two T-fittings (Figure 20, Item 2) and jam nuts (Figure 20, Item 5) on bracket (Figure 20, Item 1).
6. Install two tube end reducers (Figure 20, Item 3) on T-fittings (Figure 20, Item 2).
7. Install two hydraulic hoses (Figure 20, Item 4) on T-fittings (Figure 20, Item 2).
8. Install male and female coupler fittings (Figure 20, Item 6) on T-fittings (Figure 20, Item 2).
9. Tighten all hoses and fittings.
10. Connect two quick disconnect fittings (Figure 20, Item 7) to male and female coupler fittings
(Figure 20, Item 6).
Figure 20.
PLS M1075 Hydraulic Fittings Replacement.
051
1
2
3
2
4
5
7
6
Back to Top
