TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 502 of 704
TB 9-3950-253-13&P
Change 1
0051-16
0051
PLS REMOVAL
00051
Hard Lift Removal
00051
WARNING
•
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity.
•
Improper use of lifting equipment and improper attachment of cables may cause injury to
personnel and damage to equipment. Observe all standard rules of safety.
•
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device.
•
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Hard lift assembly weighs 240 lb (109 kg).
1. Attach sling and lifting device to hard lift (Figure 15,
Item
1).
2. Remove six nuts (
Figure 15,
Item
2
), and bolts (
Figure 15,
Item
3
) from hard lift (
Figure 15,
Item
1
).
3. Use lifting device to remove hard lift (
Figure 15,
Item
1
) from vehicle and lower onto flat surface.
Figure 15.
Hard Lift Removal.
051
Table 2.
Parts List for PLS Stowage Assembly Installation.
ITEM NO.
051
QTY
051
DESCRIPTION
051
PART NUMBER
051
Figure 20, Item 3
2
Tube End Reducer
110036205
Figure 20, Item 4
2
T-Fitting
112082301
1
2,3
Back to Top
