TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 504 of 704
TB 9-3950-253-13&P
Change 1
0051-18
0051
PLS REMOVAL – CONTINUED
Light Bar and Bumper Stop Removal
00051
1. Disconnect light bar wiring harness (Figure 17, Item 3) from vehicle wiring harness (Figure 17, Item 4).
2. Remove rear light bar (
Figure 17,
Item 2) from vehicle and set aside for disassembly and reinstallation.
3. With assistance, remove six nuts (
Figure 17,
Item 6), bolts (
Figure 17,
Item 7), and bumper stop bracket
(
Figure 17,
Item 1) from frame (
Figure 17,
Item 5). Set aside for reinstallation.
Figure 17.
Light Bar and Bumper Stop Removal.
051
Operator Platform Removal
00051
1. Remove four nuts (Figure 18, Item 10), washers (Figure 18, Item 9), springs (Figure 18, Item 8), washers
(Figure 18, Item 7), bolts (Figure 18, Item 6) and platform (Figure 18, Item 1), from platform stands
(Figure 18, Item 5).
2. Remove four nuts (Figure 18, Item 3), bolts (Figure 18, Item 4) and two platform stands (Figure 18, Item 5)
from right and left frame (Figure 18, Item 2). Set aside bolts and nuts for reinstallation.
Figure 18.
Operator Platform Removal.
051
1
2
3
4
5
6,7
1
2
3,4
5
6
7,8,9,10
(HIDDEN)
Back to Top
