TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 468 of 750

TM 5-5420-228-24

HEU HYDRAULIC FILTER HOUSING REPLACEMENT (Sheet 1 of 2)

PROCEDURE INDEX

P

r

o

c

e

d

u

r

e

s

P

a

g

e

Removal

3-204.67

Installation

3-204.68

TOOLS:

3/4-in. socket with 1/2-inch drive

1/2-inch drive ratchet

9/16-in. socket with 1/2-inch drive

SUPPLIES:

Drip pans (suitable containers)

Lockwashers (as required)

Rags (Item 12, Appendix D)

REFERENCE: LO-12

PRELIMINARY PROCEDURES:

Hydraulic reservoir drained (page 3-74)

Hose assembly "BY" removed (page 3-204.56)

Hydraulic reservoir filters removed (page 3-204.65)

Valve bank return hose assembly "BT" removed (page 3-204.51)

Hose assembly "BU" removed (page 3-204.53)

NOTE

Use drip pans and rags to catch hydraulic fluid trapped in lines.

REMOVAL:

1.

Using 9/16 inch socket, remove three screws (A) and three lockwashers (B) from hydraulic filter housing (C).

2.

Remove hydraulic filter bracket (D) from hydraulic filter housing (C).

3.

Use 3/4 inch socket, remove four screws (E) from two clamps (F).

4.

Remove hydraulic filter housing (C) from vehicle.

Go on to Sheet 2

Change 3

3-204.67