TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 470 of 750

TM 5-5420-228-24

HYDRAULIC RESERVOIR FILTER BRACKET REPLACEMENT (Sheet 1 of 2)

PROCEDURE INDEX

P

r

o

c

e

d

u

r

e

s

P

a

g

e

Removal

3-204.69

Installation

3-204.70

TOOLS:

9/16-in. socket with 3/8-inch drive

3/8-inch drive ratchet

9/16-in. open end wrench

SUPPLIES:

Lockwashers (as required)

Wood block

PRELIMINARY PROCEDURES:

Remove hydraulic filter housing (page 3-204.67)

REMOVAL:

CAUTION

Use wood block to support filters and housing prior to removing filter bracket.

Damage to equipment could occur.

1.

Use wrench to hold four nuts (A) and use socket to loosen screws (B).

2.

Remove four screws (B), nuts (A), and lockwashers (C) from hydraulic filter bracket (D).

3.

Remove filter bracket (D) from hydraulic reservoir (E).

Go on to Sheet 2

Change 3

3-204.69