TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 469 of 750

TM 5-5420-228-24

HEU HYDRAULIC FILTER HOUSING REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

Position hydraulic filter housing (A) at bracket assembly (B).

2.

Align hydraulic filter housing (A) with bracket assembly (B).

3.

Use 9/16 inch socket to install three screws (C) and three new lockwashers (D).

4.

Use 3/4 inch socket to install four screws (E) to secure two clamps (F) to hydraulic filter housing (A).

5.

Install hose assembly "BY" (page 3-204.57).

6.

Install valve bank return hose assembly "BT" (page 3-204.52).

7.

Install hose assembly "BU" (page 3-204.53).

8.

Install hydraulic reservoir filters (page 3-204.65).

9.

Service hydraulic reservoir (LO-12).

10.

Check for leaks and correct as necessary.

End of Task

3-204.68

Change 3