TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1019 of 1417
INSTALLATION
1.
Install bracket (Figure 3, Item 14) on engine (Figure 3, Item 13) with four washers (Figure 3, Item 16) and
screws (Figure 3, Item 15). Finger tighten screws.
2.
Install bracket (Figure 3, Item 10) on engine (Figure 3, Item 13) with washer (Figure 3, Item 12) and screw
(Figure 3, Item 11). Finger tighten screw.
3.
Install brackets (Figure 3, Items 8 and 10) on bracket (Figure 3, Item 14) with screw (Figure 3, Item 9), washer
(Figure 3, Item 4), and nut (Figure 3, Item 20).
4.
Install clamp (Figure 3, Item 6) on bracket (Figure 3, Item 8) with screw (Figure 3, Item 7) and locknut
(Figure
3,
Item
5).
5.
Install two resident mounts (Figure 3, Item 28), resident mount (Figure 3, Item 19), and bracket
(Figure 3, Item 24) on bracket (Figure 3, Item 14) with two washers (Figure 3, Item 21), screws
(Figure 3, Item 17), washers (Figure 3, Item 18), and locknuts (Figure 3, Item 22). Tighten screws 30 lb-ft
(41 N·m).
6.
Install bracket (Figure 3, Item 24) on radiator (Figure 3, Item 20) with two washers (Figure 3, Item 23),
lockwashers (Figure 3, Item 25), and screws (Figure 3, Item 26). Tighten screws (Figure 3, Item 26) 40 lb-ft
(54
N·m). Tighten screws (Figure 3, Item 15) 45 lb-ft (61 N·m). Tighten screw (Figure 3, Item 11).
7.
Bend tabs of two lockwashers (Figure 3, Item 25) against flats of screws (Figure 3, Item 26).
8.
Install two hood stop cables (Figure 3, Item 1) on bracket (Figure 3, Item 24) with two washers
(Figure
3,
Item
2), screws (Figure 3, Item 3), and nuts (Figure 3, Item 27).
M0132DAA
1
27
2
3
20
28
4
5
6
13
12
11
23
24
25
26
10
16
17
18
19
21
22
20
15
14
9
8
7
Figure 3.
Upper Radiator Hoses and Brackets Installation.
TM 9-2320-272-23-2
0286
0286-4
Back to Top
