TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1013 of 1417
INSTALLATION - Continued
NOTE
Perform Steps (8), (9), and (10) for internal bypass systems.
8.
Install hose (Figure 7, Item 10) on tube (Figure 7, Item 8) with clamp (Figure 7, Item 9).
9.
Install thermostat canister (Figure 7, Item 12) on hose (Figure 7, Item 10) with clamp (Figure 7, Item 11).
10.
Install hose (Figure 7, Item 14) on fitting (Figure 7, Item 16) and thermostat canister (Figure 7, Item 12) with
two clamps (Figure 7, Item 13).
11.
Install hose (Figure 7, Item 4) on tube (Figure 7, Item 15) with clamp (Figure 7, Item 7).
12.
Install hose (Figure 7, Item 18) on surge tank fitting (Figure 7, Item 1) with clamp (Figure 7, Item 17).
13.
Install hose (Figure 7, Item 4) and clamp (Figure 7, Item 5) on bracket (Figure 7, Item 3) with screw
(Figure
7, Item 6) and nut (Figure 7, Item 2).
2
3
4
5
6
7
8
9
15
12
13
14
13
11
10
16
17
18
1
M9581DAA
Figure 7.
Coolant Hoses and Lines Installation.
TM 9-2320-272-23-2
0285
0285-8
Back to Top
