TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1007 of 1417
REMOVAL
NOTE
If removal of tiedown straps is necessary, note location for installation.
1.
Remove locknut (Figure 1, Item 5), screw (Figure 1, Item 2), clamp (Figure 1, Item 3), and hose
(Figure
1,
Item
1) from bracket (Figure 1, Item 6). Discard locknut.
2.
Disconnect hose (Figure 1, Item 1) from adapter (Figure 1, Item 4) and surge tank (Figure 1, Item 18).
3.
Remove two clamps (Figure 1, Item 19) and hose (Figure 1, Item 20) from surge tank (Figure 1, Item 18) and
thermostat housing (Figure 1, Item 9).
4.
Remove adapter (Figure 1, Item 4) and two elbows (Figure 1, Item 7) from radiator (Figure 1, Item 8).
5.
Remove two clamps (Figure 1, Item 12) and remove hose (Figure 1, Item 13) from heater valve
(Figure
1,
Item
16) and fitting (Figure 1, Item 10).
6.
Remove two clamps (Figure 1, Item 11) and remove hose (Figure 1, Item 14) from heater valve
(Figure
1,
Item
15) and fitting (Figure 1, Item 17).
7
8
9
10
11
12
13
14
12
11
15
16
17
18
19
20
6
5
4
3
2
1
M9582DAA
Figure 1.
Coolant Hoses and Lines Removal.
TM 9-2320-272-23-2
0285
0285-2
Back to Top
