TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1124 of 1469
INSTALLATION
NOTE
Perform Steps (1) and (2) on vehicles equipped with turn signal canceling ring only.
1.
Install spring (Figure 2, Item 6) on steering column (Figure 2, Item 10).
2.
Install turn signal canceling ring (Figure 2, Item 4) and steering wheel ring (Figure 2, Item 3) on steering wheel
(Figure 2, Item 1) with three screws (Figure 2, Item 5).
3.
Install steering wheel (Figure 2, Item 1) on steering column (Figure 2, Item 10) by evenly tapping until nut
(Figure 2, Item 2) can be installed on steering shaft (Figure 2, Item 7). Tighten nut to 55 to 60 lb-ft
(75 to 81 N·m).
NOTE
Perform Step (4) on vehicles equipped with hand airbrake control lever.
4.
Slide hand airbrake control lever (Figure 2, Item 11) up steering column (Figure 2, Item 10) and tighten two
screws (Figure 2, Item 12).
5.
Slide turn signal control (Figure 2, Item 9) up steering column (Figure 2, Item 10) and tighten clamp
(Figure
2,
Item 8).
M5024DAA
1
2
3
8
8
5
9
6
7
1
2
11
12
10
10
4
7
9
Figure 2.
Steering Wheel Installation.
END OF TASK
TM 9-2320-272-23-3
0495
0495-3/4 blank
Back to Top
