INSTALLATION - Continued
19.
Install cable clamp (Figure 13, Item 8), lockwasher (Figure 13, Item 7), and ground wire (Figure 13, Item 6) on
frame (Figure 13, Item 9) with screw (Figure 13, Item 1) and locknut (Figure 13, Item 5).
20.
Install transorb diode ground (Figure 13, Item 4) on screw (Figure 13, Item 1) with washer (Figure 13, Item 2)
and locknut (Figure 13, Item 3).
M9895DAA
9
8
7
6
5
4
3
2
1
Figure 13.
Transfer Case Lines and Cables Installation.
TM 9-2320-272-23-3
0386
0386-18