TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 451 of 1469
INSTALLATION
1.
Install woodruff key (Figure 2, Item 12) and speedometer drive gear (Figure 2, Item 11) on intermediate shaft
(Figure 2, Item 14) with snapring (Figure 2, Item 10).
2.
Install sleeve bushing (Figure 2, Item 3), driven shaft (Figure 2, Item 4), and drive adapter (Figure 2, Item 5)
on speedometer drive gear cover (Figure 2, Item 9).
3.
Apply adhesive on contact surface of speedometer drive gear cover (Figure 2, Item 9) and install on transfer
case (Figure 2, Item 13) with four washers (Figure 2, Item 8), screws (Figure 2, Item 7), two washers
(Figure
2, Item 2), and screws (Figure 2, Item 1).
4.
Connect speedometer driveshaft (Figure 2, Item 6) on drive adapter (Figure 2, Item 5).
6
5
4
7
8
9
10
11
12
13
14
M7058DAA
3
1
2
Figure 2.
Transfer Case Speedometer Drive Gear and Driven Shaft Installation.
END OF TASK
TM 9-2320-272-23-3
0387
0387-4
Back to Top
