TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 635 of 1469
INSTALLATION
1.
Coat surface of axle shaft flange (Figure 2, Item 7) with silicone rubber adhesive.
2.
Position splined end of axle shaft (Figure 2, Item 1) into axle housing (Figure 2, Item 2). Ensure axle shaft
slides into splined differential gear (Figure 2, Item 4).
3.
Align axle shaft flange (Figure 2, Item 7) to hole in axle housing (Figure 2, Item 3).
4.
Install axle shaft flange (Figure 2, Item 7) on axle housing (Figure 2, Item 3) with 10 washers
(Figure
2,
Item
6) and screws (Figure 2, Item 5). Tighten screws 80 to 105 lb-ft (108 to 142 N·m).
5
M9169-1DAA
6
7
1
2
3
4
Figure 2.
Rear Axle Shaft Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
Lubricate axle assembly. (Volume 5, WP
0820)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0417
0417-2
Back to Top
