TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 66 of 1469
RECEPTACLE ASSEMBLY
NOTE
Refer to TB SIG-222 for soldering instructions.
1.
Strip cable insulation (Figure 5, Item 5) from cable (Figure 5, Item 7) equal to equal depth of solder wells
(Figure
5,
Item
1) of inserts (Figure 5, Item 2).
2.
Pass cable ends (Figure 5, Item 7) through grommet retaining nut (Figure 5, Item 6) and grommet
(Figure
5,
Item
3).
3.
Insert cable ends (Figure 5, Item 7) into solder wells (Figure 5, Item 1) of insert (Figure 5, Item 2) and solder.
4.
Slide grommet (Figure 5, Item 3) over inserts (Figure 5, Item 2) and press into receptacle assembly
(Figure
5,
Item
4) until seated.
5.
Thread grommet retaining nut (Figure 5, Item 6) into receptacle (Figure 5, Item 4) until seated.
M8051DAA
5
6
7
1
2
3
4
FEMALE INSERT
OR
MALE INSERT
1
2
Figure 5.
Receptacle Assembly.
END OF TASK
FOLLOW-ON MAINTENANCE
Connect battery ground cables. (Volume 2, WP
0350)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0352
0352-5/6 blank
Back to Top
