TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 962 of 1469
INSTALLATION
1.
Install gasket (Figure 4, Item 1) and air compressor (Figure 4, Item 4) on gear housing (Figure 4, Item 13) with
two washers (Figure 4, Item 2) and locknuts (Figure 4, Item 3). Tighten locknuts 55 lb-ft (75 N·m).
2.
Install brace (Figure 4, Item 5) on air compressor (Figure 4, Item 4) with two screws (Figure 4, Item 6).
3.
Install spacer (Figure 4, Item 8) on engine block (Figure 4, Item 7) and brace (Figure 4, Item 5) with two screws
(Figure 4, Item 9).
4.
Install air outlet tube (Figure 4, Item 10) on spacer (Figure 4, Item 8) with clamp (Figure 4, Item 11) and two
screws (Figure 4, Item 12).
1
2
3
4
5
6
7
8
9
10
11
12
13
M6238DAA
Figure 4.
Air Compressor Installation.
TM 9-2320-272-23-3
0470
0470-5
Back to Top
