TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 963 of 1469
INSTALLATION - Continued
NOTE
Wrap all male pipe threads with antiseize tape before installation.
5.
Install elbow (Figure 5, Item 13) on engine block (Figure 5, Item 11).
6.
Install oil supply hose (Figure 5, Item 14) on fitting (Figure 5, Item 19) and elbow (Figure 5, Item 13).
7.
Install adapter (Figure 5, Item 2) on engine block (Figure 5, Item 11).
8.
Install air inlet tube (Figure 5, Item 4) on adapter (Figure 5, Item 2) with clamp (Figure 5, Item 3). Tighten clamp.
9.
Install air inlet tube (Figure 5, Item 4) on air inlet connector (Figure 2, Item 18) with two hose clamps
(Figure
2,
Item
1). Tighten hose clamps.
10.
Install air inlet tube (Figure 5, Item 4) on engine block (Figure 5, Item 11) with screw (Figure 5, Item 12).
11.
Install elbows (Figure 5, Items 6 and 7) on engine block (Figure 5, Item 11).
12.
Install two bushings (Figure 5, Items 8 and 15) and water inlet tube (Figure 5, Item 9) on elbow
(Figure
5,
Item
7) and air compressor (Figure 5, Item 17).
13.
Install two bushings (Figure 5, Items 5 and 16) and water outlet tube (Figure 5, Item 10) on elbow
(Figure
5,
Item
6) and air compressor (Figure 5, Item 17).
14.
Install air governor tube (Figure 5, Item 23) on elbow (Figure 5, Item 22).
15.
Connect air outlet tube (Figure 5, Item 20) to elbow (Figure 5, Item 21).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
M6237DAA
Figure 5.
Air Compressor Installation.
TM 9-2320-272-23-3
0470
0470-6
Back to Top
