REMOVAL - Continued
15.
Remove two screws (Figure 3, Item 12), clamp (Figure 3, Item 11), and air outlet tube (Figure 3, Item 10) from
spacer (Figure 3, Item 8).
16.
Remove two screws (Figure 3, Item 9) and spacer (Figure 3, Item 8) from engine block (Figure 3, Item 7) and
brace (Figure 3, Item 5).
17.
Remove two screws (Figure 3, Item 6) and brace (Figure 3, Item 5) from air compressor (Figure 3, Item 4).
18.
Remove two locknuts (Figure 3, Item 3), washers (Figure 3, Item 2), air compressor (Figure 3, Item 4), and
gasket (Figure 3, Item 1) from gear housing (Figure 3, Item 13). Discard locknuts and gasket.
1
2
3
4
5
6
7
8
9
10
11
12
13
M9440DAA
Figure 3.
Power Steering Pump Removal.
END OF TASK
TM 9-2320-272-23-3
0470
0470-4