TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1093 of 1393
REMOVAL
WARNING
Ensure dump control lever is in the NEUTRAL position and has not moved. Failure to comply
may result in injury or death to personnel.
NOTE
•
Left and right roller arms are replaced the same way. Right roller arm shown.
•
Use soft-faced hammer to tap roller arm if necessary to complete Step (1).
Remove roller arm (Figure 1, Item 1) from hoist cylinder crosshead shaft (Figure 1, Item 2).
M10104DAA
1
2
Figure 1.
Dump Roller Removal.
END OF TASK
TM 9-2320-272-23-4
0723
0723-2
Back to Top
