TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 362 of 799

TM 9-2320-272-24-3

4-119. STEERING GEAR (ROSS) REPAIR (Contd)

12.

Remove jamnut (5) and wormshaft adjusting screw (6) from end cover (2).

13.

Remove jamnut (7) and poppet adjusting screw (8) from end cover (2).

14.

Remove four screws (4) and washers (3) from end cover (2).

15.

Remove end cover (2) and O-ring (9) from gear housing (1). Discard O-ring (9).

16.

Remove four screws (11) from valve housing (10) and gear housing (1).

CAUTION

Alignment marks are located on valve sleeve and wormshaft so

they can be assembled in their original position. Failure to align

marks may cause damage to steering gear.

17.

Remove valve housing (10) from gear housing (1), observing alignment marks (13) in valve housing (10)

and on wormshaft (12).

4-626