TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 427 of 801
TM 9-2320-273-34
(6)
Wire shim pack together to facilitate adjustment on reassembling.
d.
Disassemble Pinion and Cage Assembly.
(1)
(2)
(3)
(4)
(fig. 10-19).
Tap shaft out of cage with soft mallet or press shaft from cage.
Remove outer bearing from cage.
Remove spacer or spacer combination from pinion shaft.
If necessary to replace rear thrust bearing or radial bearing, remove with suitable puller
Figure 1019. Press Bearing Cage from Pinion Shaft.
(5)
Remove oil seal assembly from bearing cover.
10-19
Back to Top
