TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 722 of 801

TM 9-2320-273-34

c.

Connect two inlet pressure hydraulic lines (1, fig. 20-4) and (2).

d.

Connect two hydraulic lines to fittings at base of hydraulic reservoir. Either line can be

connected to either fitting (fig. 20-1).

e.

Secure air Iines (fig. 20-3) to pogo stick straps.

f

InstalI trailer receptacle mounting bracket (fig. 20-2) and secure with three capscrews, washers,

and nuts.

9.

Fill hydraulic reservoir with oil. (Refer to LO 9-2320-273-12.)

h.

Start up engine and operate winch to determine that it functions properly. (Refer to

TM 9-2320-273-10.) Check for leaks.

i.

Check and set relief pressure as follows.

(1)

Remove pipe plug from OUT port of auxiliary hydraulic system (fig. 20-24).

Figure 20-24. Remove/Install Out Port Plug.

20-39