TM 9-2320-273-34
(8)
Assemble primary disk (10), rotating disks (12) and stationary disks (13). Lineup
assembly with-two pins (9) and install in piston (14).
(9)
Install four capscrews (23) and washers (22). Alternately tighten bolts down; then torque
to 50-60 Ib-ft (68-81 N•m).
20-9. Repair of Final Drive Gear.
a. Disassembly.
(1)
Remove capscrews (27, fig. 20-22) and pull off cover (25), thrust washer
(24)
and
gasket (23).
20-31