TM 9-2320-273-34
20-10. Repair of Primary Speed Reducer.
a.
Disassembly.
(1)
Remove magnetic pipe plug (1, fig. 20-23) and drain residual oil.
(2)
Remove six capscrews
(2),
Iockwashers (11) and hex nuts (10) and remove front housing
assembly (12).
(3)
Remove ring gear (8) from carrier assembly (13) being careful not to damage shim(s)
(6).
(4)
Remove carrier assembly (13) from rear housing assembly (3).
1. MAGNETIC PIPE PLUG
2. CAPSCREW (6)
3. REAR HOUSING ASSEMBLY
4. PIPE PLUG
5. SHAFT SEAL
6. SHIM SET
7. O-RING (2)
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
RING GEAR
PIPE PLUG
HEX NUT (6)
LOCKWASHER (6)
FRONT HOUSING ASSEMBLY
CARRIER ASSEMBLY
BEARING RETAINER
THRUST WASHER (2)
THRUST BEARING
SUN GE
AR
BEARING CUu(JP
TA 074508
Figure 20-23. Primary Speed Reducer.
20-36