TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

  TM-9-2320-328-13-P-1 - Page 401 of 1318

TM 9-2320-328-13&P-1
0057-21
DRAFT
0057
Change 1
.
HWT0360
.
Step 30.
Pull battery disconnect switch to off position (WP 0007).
Disconnect cab pump control
wire harness cab power distribution wire harness connector.
Disconnect cab pump
control wire harness FOAM SYSTEM switch connector.
With a test lead set, check for
continuity across pump control wire harness wire 2831 (blue) from cab pump control
wire harness connector, terminal M to FOAM SYSTEM switch connector, terminal 4.
.
a.
If there is continuity, repair wire 2831 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0280).
.
b.
If there is no continuity, repair wire 2831 in cab pump control wire
harness if repairable (TM 9-2320-325-14&P), or replace cab pump
control wire harness (WP 0281).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top