TM 9-2320-328-13&P-1
0057-24
DRAFT
0057
Change 1
.
HWT0938
.
Step 33.
Pull battery disconnect switch to off position (WP 0007).
With a test lead set, check for
continuity across wire 2830 (red) from cab pump control wire harness FOAM SYSTEM
switch connector, terminal 6 to cab power distribution wire harness relay 9 connector,
terminal 1.
.
If there is no continuity, go to Step 36.
.
HWT0937
.
Step 34.
With a test lead set, check for continuity across cab power distribution wire harness wire
1640 (black) from relay 9 connector, terminal 2 to a known good ground.
.
If there is no continuity, replace cab power distribution wire harness and
block (WP 0280).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION