TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 411 of 1318

TM 9-2320-328-13&P-1

0057-31

DRAFT

0057

Change 1

.

HWT0881A

.

Step 43.

Disconnect main wire harness pump operator’s panel 27-pin wire harness connector.

Disconnect main wire harness pump house wire harness connector.

With a test lead

set, check for continuity across main wire harness wire 2830 from main wire harness

pump operator’s panel 27-pin wire harness connector, terminal 5 to main wire harness

pump house wire harness connector, terminal 4.

.

a.

If there is continuity, repair wire 2830 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump

operator’s panel wire harness (WP 0303).

.

b.

If there is no continuity, repair wire 2830 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION