TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

  TM-9-2320-328-13-P-1 - Page 413 of 1318

TM 9-2320-328-13&P-1
0057-33
DRAFT
0057
Change 1
.
HWT0887A
.
Step 45.
Pull battery disconnect switch to off position (WP 0007).
Remove skid plate
grille (WP 0349).
Disconnect main wire harness main 3 connector.
With a test lead set,
check for continuity across main wire harness wire 2816 (red) from main 3 connector,
terminal B to main wire harness pump operator’s panel 27-pin wire harness connector,
terminal 4.
.
a.
If there is continuity, repair wire 2816 in cab pump control wire harness
if repairable (TM 9-2320-325-14&P), or replace cab pump control wire
harness (WP 0281).
.
b.
If there is no continuity, repair wire 2816 main wire harness if repairable
(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top