TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

  TM-9-2320-328-13-P-1 - Page 406 of 1318

TM 9-2320-328-13&P-1
0057-26
DRAFT
0057
Change 1
.
HWT0886
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 36.
Disconnect cab power distribution wire harness cab pump control wire harness
connector.
With a test lead set, check for continuity across cab pump control wire
harness wire 2830 (red)
from cab pump control wire harness FOAM SYSTEM switch
connector, terminal 6 to cab pump control wire harness connector, terminal L.
.
a.
If there is continuity, repair wire 2830 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0280).
.
b.
If there is no continuity, repair wire 2830 in cab pump control wire
harness if repairable (TM 9-2320-325-14&P), or replace cab pump
control wire harness (WP 0281).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top