TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 830 of 1318

TM 9-2320-328-13&P-1

0075-8

DRAFT

0075

HWT1436A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 7.

Open pump house panel G access door (WP 0008).

Pull battery disconnect switch to

off position (WP 0007).

Open pump operator’s panel (WP 0207).

Check tank fill & re-

circulating valve control wire harness from TANK FILL & RE-CIRCULATING LINE valve

control to tank fill & re-circulating line valve motor for loose connections.

If connections are loose, tighten loose connections (WP 0304).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION