TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 836 of 1318

TM 9-2320-328-13&P-1

0075-14

DRAFT

0075

HWT0451

Step 14.

Disconnect main wire harness pump operator’s panel 11-pin wire harness connector.

With a test lead set, check for 22 to 28 VDC between main wire harness wire 4083

(green) at main wire harness pump operator’s panel 11-pin wire harness connector,

terminal H and a known good ground.

If 22 to 28 VDC are present, repair wire 4083 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump operator’s

panel wire harness (WP 0303).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION