TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 832 of 1318

TM 9-2320-328-13&P-1

0075-10

DRAFT

0075

HWT1435A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 9.

Push battery disconnect to off position (WP 0007).

Disconnect valve control wire

harness connectors from TANK FILL & RE-CIRCULATING LINE valve control and tank

fill & re-circulating line valve motor.

With a test lead set, check for continuity between

valve motor valve control wire harness and TANK FILL & RE-CIRCULATING LINE valve

control connectors terminal to terminal.

If there is no continuity, repair wires

(TM 9-2320-325-14&P), or replace tank

fill & re-circulating line valve control wire harness (WP 0304).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION