TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 834 of 1318

TM 9-2320-328-13&P-1

0075-12

DRAFT

0075

HWT0449A

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 11.

Pull battery disconnect switch to off position (WP 0007).

Remove pump house panel K

(WP 0339).

Open pump house power distribution (WP 0262).

Remove circuit breaker

P7 from pump house power distribution block (WP 0262).

Check for continuity across

circuit breaker.

If there is no continuity, replace circuit breaker P7 (WP 0262).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION