TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 828 of 1318

TM 9-2320-328-13&P-1

0075-6

DRAFT

0075

NOTE

Water tank must be drained.

Water will be released from water tank uncontrollably when

tank fill & re-circulating valve is removed.

Step 4.

Drain water tank if required (WP 0015).

Pull battery disconnect switch to off position

(WP 0007).

Reconnect valve control wire harnesses to original positions.

Remove tank

fill & re-circulating line valve (WP 0191) and inspect it for binding, damage, and

contamination.

a.

If tank fill & re-circulating line valve is free from binding, damage and

contamination, reinstall valve and replace tank fill & re-circulating line

valve motor and drive assembly (WP 0248), and go to Step 7.

b.

If tank fill & re-circulating line valve is binding, damaged, and/or

contaminated, repair (WP 0249), or replace tank fill & re-circulating line

valve (WP 0191).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION