TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 920 of 1318

TM 9-2320-328-13&P-1

0081-14

DRAFT

0081

Change 1

..

HWT3092

..

Step 19.

Pull battery disconnect switch to off position (WP 0007).

Reconnect pump operator’s

panel wire harness level gauge connectors to original positions.

Remove skid plate

grille (WP 0349).

Disconnect main wire harness main 3 connector.

Disconnect pump

operator’s panel wire harness water level gauge connector from pump operator’s

panel WATER level gauge.

With a test lead set, check for continuity across wire 3855

(white) from main wire harness main 3 connector, terminal M to pump operator’s panel

wire harness pump operator’s panel water level gauge connector, terminal 6.

..

If there is continuity, repair wire 3855 in cab pump control wire harness if

repairable (TM 9-2320-325-14&P), or replace cab pump control wire

harness (WP 0281).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION